Description
CBS350-24P-4G Specification
| CBS350-24P-4G Specification | |
| Feature | Description | 
| Capacity in Millions of Packets per Second (mpps) (64-byte packets) | 41.66 | 
| Switching Capacity in Gigabits per Second (Gbps) | 56.0 | 
| Total System Ports | 28 x Gigabit Ethernet | 
| RJ-45 Ports | 24 x Gigabit Ethernet | 
| Combo Ports (RJ45 + Small form-factor pluggable [SFP]) | 4 x SFP | 
| Packet Buffer | 1.5 MB | 
| Unit dimensions (W x D x H) | 445 x 299 x 44 mm (17.5 x 11.77 x 1.73 in) | 
| Layer 3 | |
| IPv4 routing | Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces | 
| IPv6 routing | Wirespeed routing of IPv6 packets | 
| Layer 3 Interface | Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface | 
| Classless Interdomain Routing (CIDR) | Support for classless interdomain routing | 
| RIP v2 | Support for Routing Information Protocol version 2 for dynamic routing | 
| Policy-Based Routing (PBR) | Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) | 
| DHCP Server | Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options | 
| DHCP relay at Layer 3 | Relay of DHCP traffic across IP domains | 
| User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets | 
| Quality of Service | |
| Priority levels | 8 hardware queues | 
| Scheduling | Strict priority and Weighted Round-Robin (WRR) | 
| Rate limiting | Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing | 
| Congestion avoidance | A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization | 
| iSCSI traffic optimization | A mechanism for giving priority to iSCSI traffic over other types of traffic | 
| Green (power efficiency) | |
| Energy Detect | Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up | 
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. | 
| EEE Compliant (802.3az) | Supports IEEE 802.3az on all copper Gigabit Ethernet ports | 
| Disable port LEDs | LEDs can be manually turned off to save on energy | 
| Time-based port operation | Link up or down based on user-defined schedule (when the port is administratively up) | 
| Time-based PoE | PoE power can be on or off based on user-defined schedule to save energy | 
| General | |
| Jumbo frames | Frame sizes up to 9K bytes. The default MTU is 2K bytes | 
| MAC table | 16K addresses | 
| Hardware | |
| USB slot | USB Type-A slot on the front panel of the switch for easy file and image management | 
| Buttons | Reset button | 
| Cabling type | Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T | 
| LEDs | System, Link/Act, PoE, Speed | 
| Flash | 256 MB | 
| CPU | 800 MHz ARM | 
| DRAM | 512 MB | 
| Environmental | |
| Storage temperature | -13° to 158°F (-25° to 70°C) | 
| Operating humidity | 10% to 90%, relative, noncondensing | 
| Storage humidity | 10% to 90%, relative, noncondensing | 
| Warranty | Limited lifetime with next business day advance replacement (where available) | 
| Package Contents | |
| ●  Cisco Business 350 Series Managed Switch ● Power Cord (Power adapter for select 8-port and 16-port SKUs) ● Mounting Kit ● Quick Start Guide | |
| Minimum Requirements | |
| ●  Web browser: Chrome, Firefox, Edge, Safari ● Category 5e Ethernet network cable ● TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed | |







Reviews
There are no reviews yet.