Description
Cisco Catalyst 24 Ports Network Switch (WS-C2960+24TC-S)
PRODUCT INFORMATION
DESCRIPTION:
• 24 Ports LAN Lite Switches,
• Supporting 24 x 10/100 ports
• Designed for branches
• Conventional office workspaces
Specifications:
| Configurations | |
| 10/100 Ethernet Interfaces | 24 |
| Uplink Interfaces | 2 (SFP or 1000BASE-T) |
| Cisco IOS Software Feature Set | LAN Lite |
| Available PoE Power | None |
| Hardware | |
| Flash memory | 64 MB |
| DRAM | 128 MB |
| Performance and Scalability | |
| Forwarding bandwidth | 16 Gbps |
| Maximum active VLANs | 64 |
| VLAN IDs available | 4K |
| Maximum transmission unit (MTU) – L3 packet | 9000 bytes |
| Jumbo frame – Ethernet frame | 9018 bytes |
| Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second | 6.5 |
| Mechanical | |
| Dimensions (H x W x D) | 1.73 x 17.70 x 9.52 in (4.4 x 45.0 x 24.2 cm) |
| Weight | 8 lb (3.6 Kg) |
| Package Weight | 17.04 lb (7.73 Kg) |
| Environmental Ranges | |
| Operating temperature up to 5000 ft (1500 m) | 23º to 113ºF |
| (-5º to 45ºC) | |
| Operating temperature up to 10,000 ft (3000 m) | 23º to 104ºF |
| (-5º to 40ºC) | |
| Short-term exception at sea level* | 23º to 131ºF |
| (-5º to 55ºC) | |
| Short-term exception up to 5000 feet (1500 m)* | 23º to 122ºF |
| (-5º to 50ºC) | |
| Short-term exception up to 10,000 feet (3000 m)* | 23º to 113ºF |
| (-5º to 45ºC) | |
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF |
| (-5º to 40ºC) | |
| Storage temperature up to 15,000 feet (4573 m) | 23º to 158ºF |
| (-25º to 70ºC) | |
| Operating altitude | Up to 10,000 Feet |
| (Up to 3,000 Meters) | |
| Storage altitude | Up to 13,000 Feet |
| (Up to 4,000 Meters) | |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
| Sound Pressure, dBA | Typical, LpAm: 33 |
| Maximum, LpAD: 36 | |
| Sound Power, dbA | Typical, LwA: 43 |
| Maximum, LwAD: 46 | |
| MTBF in thousands of hours | 667 |
| Connectors and Interfaces | |
| Ethernet Interfaces | 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling |
| 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling | |
| 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling | |
| 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling | |
| Indicator LEDs | Per-port status: Link integrity, disabled, activity, speed, and full duplex |
| System status, Port Status, RPS, link duplex, and link speed | |
| Console | Cisco Catalyst console cables: |
| CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 | |
| Power | The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC. |
| Use the supplied AC power cord to connect the AC power connector to an AC power outlet. | |
| The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch. | |
| Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle. | |
| Voltage and Power Ratings | |
| Voltage (Autoranging) | 100 to 240 VAC |
| Current (Amperes) | 0.4 – 0.2 |
| Frequency | 50 to 60Hz |
| Power Rating (kVA) | 0.02 |
| DC Input Voltages (RPS Input) | 2A at 12V |
| Power Consumption | 0% traffic: 18.6 |
| 10% traffic: 18.7 | |
| 100% traffic: 19.1 | |
| ATIS weighted average: 18.8 | |
| Safety and Compliance | |
| Regulatory Compliance | Products should comply with CE Marking per directives 2004/108/EC and 2006/95/EC |
| Safety | UL 60950-1 Second Edition |
| CAN/CSA-C22.2 No. 60950-1 Second Edition | |
| EN 60950-1 Second Edition | |
| IEC 60950-1 Second Edition | |
| AS/NZS 60950-1 | |
Reviews
There are no reviews yet.